MYLATHES

Since 1985, the ultimate goal behind MYLAS Machinery is to provide the best solutions to our customers. The modern design and innovative developments are attributed to the spirit of MYLAS. Explore the current MYLAS product portfolio to find out more.

  • Dual Spindles & Dual Y-Axes
  • Up to 38 Tools
  • Optional Tailstock available
go to product
  • Dual Spindles & Dual Turrets
  • Y-Axis Functionality
  • 12 Station VDI30/ BMT 45 Live Turret
go to product
  • Double Spindle
  • Turret + Gang Tools
  • Y axis available
  • Superimposed Function
go to product
  • Twin Spindle Twin Robot Lathe
  • For Mass Production, working diameter upto 42mm
  • Ultra Precise, small floor print
go to product
  • One Live Turret & Dual Spindles
  • Y-Axis Functionality
  • 12 Station Live Turret
go to product
  • 4 Live Tools on Y-Axis
  • Up to 6 Live Tools on Z-Axis
  • 6 Customized Tooling System
go to product
  • One Spindle & One Turret
  • 2 Axes
  • Max 65mm Bar Dia
go to product
  • Max 20mm Dia
  • 5 Tools
  • 2 Dual Shaft
go to product

Lathes developed by MYLAS are able to machine many different materials including aluminum, stainless steel...

go to product
CONTACT
MYLAS
CONTACT
MYLAS
E-mail sales@mym.com.tw Tel +886-4-25377564 Fax +886-4-25377645 INQUIRY DISTRIBUTOR
MYTECH

Technology & Solutions

Chip Breaking Function

In the CNC turning field, it is difficult to deal with the material such as aluminum, stainless steel, Tritium chips, because its characteristic of the flurry chips, it bothers the programmer very much.

The non-removable chips decreases the workpiece surface roughness, tool life decrease, and increase cycle time. In the past, the engineer use external air blow to the workpiece, high pressure coolant, or specialty tools to overcome the problem. However, it can only address the symptoms of the problem, rather than solving the problem at root.

CITIZEN MACHINERY(CINCOM/MIYANO) invented LFV technology together with Mitsubishi corporation in year 2014, call Low Frequency Vibration Technology. The control technology synchronizes the vibration of the servo axis with the revolution of the main axis. LFV breaks chips into small pieces and discharges them during operation. This addresses all the problems caused by entangled chips during difficult-to-cut material machining and deep hole drilling.

Even this function seems like very convenient, the actual cost is consider as very high at the moment to add this option. Also the future maintenance is also the factor to think because the axis ballscrew may be worn out due to the servo vibration, and it has to constantly keep lubricated and increase the interval of the lubrication time.

In recent years, the demand of LFV has increased, and lots of competitor from Citizen has developed similar function, such as the ACTIVE CHIP BREAKER from the Swiss Manufacturer, Tornos, and the famous sliding head maker, Star from Japan invented the function called HFT(HIGH FREQUENCY TURNING).

The Controller Maker, Fanuc, also introduced the function, servo oscillation, in selected controller as an option, which can installed in every kind of machine.

MYLAS also started to adapt this function in 2019, and customer is happy for its performance, because it greatly slash the operating time for programmer. We are now available to choose this option in all kind of machine with great pricing compare to Japanese or Europe brand.

You may check the following video to see the comparison of the chip breaking.

DISCLAIMER

This Article has been collected and sourced from various relevant articles and publications from the internet and is intended to illustrate to the reader.